iFIX-C platdak montageplaat set

Art nr. 5000162
    
REQUIREMENTS  Roof inclination maximum 5° Permissible roof skins: Bitumen, plastic foil, gravel. No permanent ponding water on the roof. Wind load zones 1 to 3(min. distance to shore 3 km) maximum peak velocity pressure 1150 N/m² Pressure load up to 5.4 kN/m² Building height: up to 25 m Areaload
Dit product kan op dit moment niet worden besteld.
Omschrijving

REQUIREMENTS 

Roof inclination maximum 5°
Permissible roof skins: Bitumen, plastic foil, gravel.
No permanent ponding water on the roof.
Wind load zones 1 to 3(min. distance to shore 3 km)
maximum peak velocity pressure 1150 N/m²
Pressure load up to 5.4 kN/m²
Building height: up to 25 m
Areaload 4.47 kg/m² inclusive protection mats and clamps,without PV and weighting
Module direction horizontal
Usable PV modules with frame size minimum 1.638 x 982 mm maximum 1.675 x 1.000 mm
Lower horizontal mounting fl ange required
Grid dimension in row PV module length +10 mm (maximum 1.685 mm)
To calculate length of row, add 400 mmfor end sections.
Grid dimension between rows 1.590 mm at 16° 
shading angle 1.519 mm at 18° shading angle
Height maximum 231 mm (without PV module)
Module angle 10°Shading angle selectable 16° or18°
Material 
Sheet parts made of corrosion protectedaluminum-zinc-coated steel sheet
Lever clamps: stainless steel
Certificates, tests,standards:
Since June 2017: general building supervisory approval of the German Institute for StructuralEngineering (DIBt)Wind tunnel expertiseStatic according to eurocodetested lightning current load capacity according toDIN EN 50164-1 and DIN EN 62305-3

datasheets
Datasheet iFix ES
Datasheet iFix AL standaard aluminium klemmen
Specificaties
Produktgroepcode 7010
Merk iFIX Solar
Soort product Montageplaat
    Aan het laden
    Aan het laden